Analytical Instrumentation
Determination of Sulphur in ULSD, Biodiesel and Jet Fuel
Dec 04 2012
Petroleum fractions boiling in the range 150°C to around 350°C include jet fuel, kerosine and diesel fuel. These are commonly referred to as middle distillates and are often blended with cracked products from the hydrocracking and hydrogenation of heavy feedstocks.
This application note describes a direct injection technique for the routine analysis of sulphur content in common middle distillate fuels. A Thermo Scientific (USA) iPRO 5000 S Total Sulphur combustion analyser fitted with a Thermo Scientific jetPRO direct spray injector was used to measure the Total Sulphur (TS) content of three ASTM Crosscheck sample types - ultra low sulphur diesel (ULSD), biodiesel and jet fuel.
Download full application note: www.thermoscientific.com/ipro
Digital Edition
PIN 25.2 Apr/May
May 2024
Safety - Carbon monoxide toxic and flammable gas detection Analytical Instrumentation - Density: A fundamental parameter at critical stages within the petroleum sector - Advancements and...
View all digital editions
Events
Jul 10 2024 Birmingham, UK
Thailand Oil & Gas Roadshow 2024
Jul 11 2024 Rayong, Thailand
Jul 20 2024 Denver, CO, USA
Jul 21 2024 Cape Town, South Africa
Jul 24 2024 Bogata, Colombia