ERAFLASH S10^TM – The Automated Side of Safe Flash Point Testing

ERAFLASH S10 is eralytics unique 10-position autosampler flash point tester. It is the perfect instrument for the automated analysis of up to 10 samples making it the analyser of choice for high-throughput laboratories, handling large amounts of samples every day.

ERAFLASH S10 is fully compliant with ASTM D7094 and ASTM D6450 that offer ASTM proven excellent correlation to Pensky Martens testers (ASTM D93). Both are continuously closed cup methods and therefore intrinsically safe in usage.

With a low sample volume of 1-2 mL and the intrinsically safe continuously closed cup method it is the ideal instrument for unattended flash point measurements and guarantees maximum safety. There is no risk at all of a fire in the lab as any flame is automatically extinguished due to a lack of oxygen.

With its unrivaled temperature range of -25 to 420 C (-13 to 788 °F) ERAFLASH S10 can be used for fuel specification purposes and is also an extremely cost efficient tool for special applications like the flavors and fragrances industry all the way to big used oil testing facilities. All industries profit from the small sample volume and the patented Peltier Boost Technology (PBT)TM allowing for unmatched heating and cooling rates and therefore for shortest turnaround times on the market.

Another great benefit is the optional cooling lid for the ERAFLASH S10 10-position autosampler – which is a unique solution for many reasons: The pre-cooled lid allows easy and time-saving sample preparation. As a consequence the sample cups are pre-cooled as well what means that no complicate cooling prior sample filling is necessary.

The pre-cooled samples need less intensive cooling during sample measuring resulting in shorter turn-around times. As no elevated temperatures are reached and volatile compounds are far less likely to evaporate before measurement is started, more precise and reliable results are reached.

For even more measurement comfort eralytics’ flash point testers offer a quality control (QC) mode right on the instrument. To perform efficient quality control, the user can set individual warning levels to each QC sample. If a sample is measured and the results fall outside these limits a warning is automatically displayed. QC charts are available to easily identify long term drifts and perform statistical evaluations of results.

With the new Software Generation 8 eralytics again took a further step towards an even more user-friendly interface, guiding the user easy and fast through all necessary measurement steps.

Due to the outstanding speed and precision the ERAFLASH S10 is the preferred flash point tester for diesel, jet fuel and lube oil testing.