Biofuel Industry News
Biodiesel Application Flash
May 10 2010
Horiba Jobin Yvon (France) provides a complete analytical support to help first-time users as well as experienced analysts. It consists of a series of application notes or application flash which describes the operating conditions, the benefit of a specific accessory or analytical optimization to improve sensitivity, stability, accuracy.
This application flash describes the analytical procedure for all products from raw materials to biodiesel, following the international norms (ASTM D-6751, pr EN 14214, E DIN 51606). Depending on the product, the sample preparation may vary, in terms of solvent choice. However, the sample introduction system and parameters are the same, and analyses can be performed in a routine way. The ACTIVA-S is the ideal ICP-AES instrument for this application, thanks to its Simplicity and Stability criteria. The limits of detection are estimated from a calibration in 10 % Base Oil in Kerosene, with the formula LOD = 3 x SD. SD is the Standard Deviation of the blank concentration from an analysis with 10 replicates. The limit of quantification is then LOQ = 3.3 x LOD. Examples of biodiesel application analysis, with analysis of rapeseed oil, stearic oil (saturated fatty acid from animal or vegetable fat) and biodiesel are given.
Digital Edition
PIN 25.2 Apr/May
May 2024
Safety - Carbon monoxide toxic and flammable gas detection Analytical Instrumentation - Density: A fundamental parameter at critical stages within the petroleum sector - Advancements and...
View all digital editions
Events
Jul 10 2024 Birmingham, UK
Thailand Oil & Gas Roadshow 2024
Jul 11 2024 Rayong, Thailand
Jul 20 2024 Denver, CO, USA
Jul 21 2024 Cape Town, South Africa
Jul 24 2024 Bogata, Colombia