Safety
Hydrogen Detection during Cask Welding Improves Process and Eliminates Stoppages - NUCLEAR APPLICATION
Jan 15 2015
TECHNICAL BACKGROUND
At Energy Northwest in Richland, WA an argon purge during the cask welding process was the result of a procedural change, requiring nuclear facilities to purge with an inert gas during the welding operation. As almost all combustible gas sensing technologies require oxygen to operate correctly, they cannot be implemented in the argon purged/inert environment, required for this application.
THE H2SCAN SOLUTION
H2scan’s HY-ALERTA™ 500 Handheld Hydrogen Leak Detector does not require oxygen to operate making it the ideal solution for monitoring for hydrogen build up during the welding process. The Model 500 was used to sample for hydrogen every 10 minutes for the entire time between starting the argon purge until the lid-to-shell weld is 100% complete.
“H2scan’s HY-ALERTA™ 500 was very reliable, easy to use, and improved our cask welding process.” - Steve Flood, Reactor Maintenance, Columbia Generating Station, Energy Northwest
PROJECT BENEFITS
Without the H2scan Model 500 it would not be possible to detect a hydrogen build up during the cask welding process. A flash or burn-through is not only dangerous, it would cause a stoppage of the entire facility. Implementing H2scan’s analyzer allowed operators to closely monitor the hydrogen concentration in real time and preemtively halt the welding process if hydrogen was present before a costly stoppage occurs.
Digital Edition
PIN 25.2 Apr/May
May 2024
Safety - Carbon monoxide toxic and flammable gas detection Analytical Instrumentation - Density: A fundamental parameter at critical stages within the petroleum sector - Advancements and...
View all digital editions
Events
Jul 10 2024 Birmingham, UK
Thailand Oil & Gas Roadshow 2024
Jul 11 2024 Rayong, Thailand
Jul 20 2024 Denver, CO, USA
Jul 21 2024 Cape Town, South Africa
Jul 24 2024 Bogata, Colombia