Expect more – the SVM Stabinger Viscometer series

Anton Paar launches an entire SVM™ series for easy, accurate and fast measurement of viscosity. These viscometers give you more parameters than any other kinematic viscometer on the market. Find out more about SVM™ 4001, SVM™ 3001 and SVM™ 2001.

SVM™ 4001
The innovative double-cell design of SVM™ 4001 allows for simultaneous measurements at 40°C and 100°C from a single syringe. As each of the measuring cells also contains an integrated density oscillator, density measurements according to ASTM D4052 are simultaneously performed at each temperature. The minimum sample volume needed for Viscosity Index determination and the density measurements is only 2.5 mL. The Viscosity Index results according to D2270 as well as API calculations are automatically shown on the 10x4” touchscreen.

Moreover, SVM™ 4001 allows for simultaneous determination of viscosity and density at any two temperatures between 15°C and 100°C. It also provides viscosity-temperature extrapolation according to ASTM D341 and freely selectable API grades.

Both density cells are equipped with the FillingCheck™ technology compliant with D4052 requirements, which works over the entire viscosity range and also for opaque samples.

The optional modular combination of SVM™ 4001 with Anton Paar refractometers allows for determination of the carbon-type composition of transformer oils with automatic calculations according to ASTM D2140 and D3238 within minutes.

SVM™3001
The SVM™ 3001 Stabinger Viscometer™ is a highly precise kinematic viscometer with an integrated density measuring cell. A single measuring cycle on only 1.5 mL sample yields the kinematic viscosity, density, dynamic viscosity, Viscosity Index and more.

As the density cell of SVM™ 3001 is integrated, the density measurement according to ASTM D4052 and ISO 12185 does not have to be carried out separately. One combined measuring cell covers the entire measuring range for viscosity, density and temperature and is filled in one go.

With unprecedented heating and cooling rates of up to 20°C/min and a temperature range from -60°C to +135°C, SVM™ 3001 is perfectly suited for a wide range of samples and measurements. As temperatures down to -20°C can be reached without external cooling due to built-in air cooling, SVM™ 3001 is ideal for jet fuel certification according to ASTM D1655, D7566 and DEF STAN 91-91 and also fulfills the Aviation Fuel Quality Requirements for Jointly Operated Systems (AFQRJOS). Temperatures down to -60°C are reached by connecting an external cooler with methanol-free cooling. SVM^™ 3001 is capable of performing very fast temperature scans, so valuable information on the critical viscosity of the fuel can be obtained in an easy and fast manner.

SVM™ 2001
The SVM™ 2001 Stabinger Viscometer™ is a viscometer with the proven benefits of the SVM™ technology for a temperature range from 15°C to 100°C and a viscosity range from 0.2 mm²/s to 30000 mm²/s. Kinematic and dynamic viscosity are measured according to D7042 with a minimum sample volume of only 1.5 mL. Its intuitive software and unbeatable ease of operation make SVM™ 2001 suitable for a wide variety of measurements at any constant temperature within the range.

In order to maximize productivity and meet the demands of high throughput, all SVM™ models can be used with a 71-position sample changer.